Wood ReNew

Renews the natural beauty of bare wood. A biodegradable, non-toxic, percarbonate-based wood cleaner that brightens grayed and weathered wood. This is the best product to remove the UV damage on your logs.

Features:

• Removes UV graying, mill glaze, old finishes, water stains, mold, mildew and unbound pigment
• Returns wood to natural color

Log Wash

Cleans and Conditions Bare Wood Surfaces. Used for Maintenance Cleaning. Interior and Exterior

Features:

• Removes dirt, dust, and pollen from log surfaces.
• Will not harm finishes that are in good condition.
• Is safe to use on chinking and sealants.
• Is environmentally friendly.

Cedar Wash

A ready to use cleaner for Western Red Cedar, Walnut, Mahogany and Redwood.

Features:

• Removes dirt, dust, pollen, resin oils, and wood extractives
• Will not harm finishes that are in good condition.
• Is safe to use on chinking and sealants.
• Is environmentally friendly.

Oxcon

Blonding agent – oxalic acid concentrate. This is the only product that will remove dark colored streaks from metallic tannates.

Features:

• 4 to 1 concentration for ease of use
• Restores weathered wood to natural color
• Brightens darkened or faded wood.

Blaster-Buddy

A finish removal system that combines high-volume compressed air with special corncob blasting media. It provides an easy, safe method of removing old finishes from your log home, leaving it clean, dry and ready for a fresh coat of stain.

Features:

• No water is used so ther is no chance of water getting inside the home.
• There are no chemical strippers to worry about.
• Clean up is easy and the organic blasting media is biodegradable.
• Once blasting is completed, you are all ready to apply a preservative or stain.

Prelude

Recommended treatment after media blasting wood.

Prelude is a sealer/primer for wood surfaces that have been media blasted. One coat fills the pores of the wood and provides a uniform surface film in preparation for the application of a pigmented stain.

StripIt

High-Performance Stain and Finish Remover

StripIt is a water-based, non-hazardous pH neutral stain and finish remover.

Features:

• Will not harm or discolor chinking or sealants.
• Will not harm, mar or discolor metal surfaces.
• Odor free
• Zero VOC

S-100

An Environmentally Friendly Finish Remover

StripIt is a water-based, non-hazardous pH neutral stain and finish remover.

Features:

• Will not harm or discolor chinking or sealants.
• Will not harm, mar or discolor metal surfaces.
• Odor free
• Zero VOC

M-Balm

Liquid epoxy wood restoration system – Epoxy Wood Consolidator

Wood that has lost its integrity due to decay or insects can be hardened and consolidated with M-Balm.

Features:

• Restores strength to deteriorated wood
• two component liqud
• Vinegar clean-up
• Deep penetrating

E-Wood

E-Wood is an epoxy putty wood restoration system for filling voids in decayed wood.

Features:

• Restores strength to deteriorated wood
• Can be sawed, drilled, routed, nailed, screwed, painted and stained.
• It may be shaped, molded and textured to match the surrounding wood